On stage micro ii, Speaker dock for iphone/ipod. Read online or download PDF. JBL ON Stage Micro II User Manual Manuals Directory ManualsDir.com - online owner manuals library Search. View online Operation & user’s manual for JBL On Stage IIIp Docking Station or simply click Download button to examine the JBL On Stage IIIp guidelines offline on your desktop or laptop computer. View and Download JBL ON Stage Micro II instruction manual online. Link JBL on Youtube. Link JBL Audio on Snapchat. If you are using a screen reader and are having problems using this website, please call (800) 336-4525 for assistance. Full-range Odyssey® transducers are one secret of the remarkable JBL On Stage® Micro III sound. With an impressive frequency response of 110Hz – 20kHz, these stiff, lightweight drivers feature computer-optimized equalization, which uses digital signal processing (DSP) to create a big, rich soundstage. Easy touch controls and an IR remote.
6
Troubleshooting
Symptom
Possible Problem
Solution
No sound from the JBL On Stage
Micro II speaker system (continued)
The JBL On Stage Micro II has been
muted for more than 10 minutes in the
battery-only mode
Press the JBL On Stage Micro II Power button to turn the unit
back on. Press either (+) or (–) to unmute.
No sound, no LED
No audio signal has been received for
10 minutes and JBL On Stage Micro II
is in standby mode
Make sure audio signal is supplied through docked iPhone/iPod
or “Audio In” jack.
No power; green LED is not on
Wall adapter is not plugged into the
JBL On Stage Micro II correctly
Wall adapter is not receiving AC power
Check the connection of the wall adapter.
Place the wall adapter in a known powered outlet. Test the outlet
And, if you think that this writing is informative, we welcome you to share it in your personal page. Lumix gf1 manual download. Hopefully, it can be beneficial for you in updating your understanding toward camera product.But, if you still have other ideas about this camera, putting them in the comment session below will be so much contributive.
with a lamp or other device.
Connect the JBL On Stage Micro II to a known audio source.
Test the audio source with headphones.
User Guide | |
English............. | 2 |
Deutsch............ | 8 |
Français............ | 15 |
Español........... | 22 |
Italiano............ | 29 |
Dutch............. | 36 |
Korean............ | 43 |
Norwegian......... | 50 |
Danish............. | 57 |
Japanese........... | 64 |
Simplified Chinese... | 71 |
Finnish............ | 78 |
Russian............ | 85 |
Português.......... | 92 |
®
jbl on stage®*micro IIspeaker dock for iPhone/iPod
Important Safety Instructions
Please read the following precautions before use:
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with a dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket or table
specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15.Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
16.To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle.
17.The mains plug of the power supply cord shall remain readily operable.
18.Do not expose batteries to excessive heat such as sunshine, fire or the like.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Important Note for All Electronic Products:
Before inserting or unplugging audio cables from the source device’s headphones or line-level output jacks, it is good practice to turn off the device first. This will prolong the life of your unit, help protect your device from static electricity and prevent potential damage.
fcc regulations
FCC Information for Users
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Increase the separation between the equipment and receiver.
•Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.
•Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by JBL could void the user’s authority to operate the equipment.
Battery Disposal
Alkaline batteries are considered non-hazardous. Rechargeable batteries (i.e., nickel cadmium, nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and may pose an unnecessary health and safety risk.
In the European Union and other locations, it is illegal to dispose of any battery with household trash. All batteries must be disposed of in an environmentally sound manner. Contact your local waste management officials for information regarding the environmentally sound collection, recycling and disposal of used batteries.
IC Statement and Warning
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
jbl on stage micro II easy setup guide
Syncing and transfering files with your computer
Make sure your iPhone/iPod is securely docked into the JBL On Stage Micro II. Connect a USB cable (not included) into the USB jack on the back of the unit, connect other end of the USB cable directly to your computer’s USB port. Make sure your iPhone/iPod and iTunes are updated to the latest software version.
troubleshooting your jbl on stage micro II
Technical Specifications | Troubleshooting | ||
Symptom | Possible Problem | Solution | |
Frequency Response: | No sound from the | No power to the system | Ensure that the power supply is connected to a live |
70Hz – 20kHz | JBL On Stage Micro II | Power adapter plug is not | power source and properly connected to the JBL On |
Power Consumption: | speaker system | Stage Micro II. Note: When the JBL On Stage Micro II | |
inserted correctly | is powered, a green power LED on the JBL On Stage | ||
10W Maximum | Micro II should light up. | ||
Power Input: | |||
No volume or low volume | Touch the volume “Up” (+) pad on the volume | ||
6V/1.5A | |||
control to unmute and/or increase the system volume | |||
JBL On Stage Micro II Transducer: | level. | ||
(2) 1' Full range per channel | Note: Touching the volume “Down” (–) pad lowers | ||
Dimensions: | the system volume. Touching both the (+) and (–) | ||
Diameter – 6' (150mm) | volume control pads at the same time will mute the | ||
Height – 1-3/4'(38mm) | system. | ||
System Weight: | |||
Input source is low | Increase the volume level on the audio source device. | ||
2.22 lb (1.01kg) | |||
Battery: | Low or drained batteries | Replace the batteries. | |
Size – AAA | |||
iPhone/iPod is paused | Press the Play button on the iPhone/iPod or remote | ||
Type – Alkaline, NiMh | |||
control. | |||
Quantity – 4 | |||
DO NOT MIX BATTERY TYPES. | iPhone/iPod is paused | Note: If the iPhone/iPod is paused more than 10 min- | |
DO NOT MIX CHARGED AND | (battery-only mode) | utes, press the JBL On Stage Micro II Power button to | |
turn the unit back on. Press either (+) or (–) | |||
PARTIALLY CHARGED BATTERIES. | to unmute. | ||
BATTERIES WILL NOT RECHARGE | |||
WHILE IN JBL On Stage MICRO II. |
If you have any questions or need further assistance, please visit www.jbl.com.
These specifications are subject to change without notice.
Troubleshooting | ||
Symptom | Possible Problem | Solution |
No sound from the JBL On Stage | The JBL On Stage Micro II has been | Press the JBL On Stage Micro II Power button to turn the unit |
Micro II speaker system (continued) | muted for more than 10 minutes in the | back on. Press either (+) or (–) to unmute. |
battery-only mode | ||
No sound, no LED | No audio signal has been received for | Make sure audio signal is supplied through docked iPhone/iPod |
10 minutes and JBL On Stage Micro II | or “Audio In” jack. | |
is in standby mode | ||
No power; green LED is not on | Wall adapter is not plugged into the | Check the connection of the wall adapter. |
JBL On Stage Micro II correctly | ||
Wall adapter is not receiving AC power | Place the wall adapter in a known powered outlet. Test the outlet | |
with a lamp or other device. | ||
Connect the JBL On Stage Micro II to a known audio source. | ||
Test the audio source with headphones. |
Troubleshooting | |||
Symptom | Possible Problem | Solution | Note |
There is no sound coming from | No power to unit. | Make sure that the wall outlet | Is the LED on? If the LED |
the JBL On Stage Micro II. | or power strip has power. | is not on, power is not | |
Make sure that all switches for | getting to your JBL On Stage | ||
outlet/power strip are on and | Micro II. Try the solutions | ||
that all switches for the unit | shown. | ||
are on. | |||
Incorrect source selection. | Make sure that the iPhone/iPod | ||
is properly docked or that the | |||
auxiliary cable is properly con- | |||
nected. | |||
Turn up the volume. | |||
Check the unit with a source | |||
that you know to be good. | |||
Connect the “Aux In” cable to | |||
the headphone jack of your | |||
iPhone/iPod. | |||
Sound comes from only one | iPhone/iPod or auxiliary cable | Make sure that the iPhone/iPod | If you are using a 3.5mm |
side/channel. | is not seated properly. | is seated all the way into the | auxiliary extension cable, |
docking station. | make sure it is a stereo | ||
cable. | |||
Make sure that the auxiliary | |||
cable is seated all the way into | |||
the jack. | |||
Try resetting the iPhone/iPod. |
Troubleshooting | |||
Symptom | Possible Problem | Solution | Note |
Distortion (static, cracking | Audio source or source material | Test the JBL On Stage Micro II | Does the distortion occur with |
or hissing sounds). | may be the problem. | with another source. | specific songs? If so, check |
the recording or record the | |||
source again. | |||
Volume level may be too high. | Check the volume of the source. | Some devices will distort the | |
output signal if the volume is | |||
set to maximum. | |||
EQ setting may be too high. | Check the EQ setting on your | It is recommended that you set | |
iPhone/iPod or source device. | the source device EQ to “Flat” | ||
or “Off.” | |||
JBL On Stage Micro II | Input cable is not plugged in | Check the input cable connec- | |
emits a loud hum | properly. | tion. | |
or buzzing noise. | |||
Cable may be bad. | Replace the cable. | ||
Ground logo (an unsuitable | Turn the JBL On Stage Micro II | ||
connection). | off and connect it to another | ||
wall outlet. | |||
Speaker system experiences | Input cable may be | Purchase a ferrite core and | |
radio-frequency interference or | picking up interference. | wrap the excess cable around it. | |
picks up a radio-station trans- | A ferrite core can be purchased | ||
mission. | at your local electronics store. |
jbl on stage micro II remote easy setup guide
Volume Down | Volume Up |
iPhone/iPod Play/Pause1 | Mute/Unmute1 |
iPhone/iPod Previous/Rewind | iPhone/iPod Next/Fast Forward |
*Hold for “rewind” | *Hold for “fast forward” |
iPhone/iPod Scroll Up | iPhone/iPod Scroll Down |
iPhone/iPod Menu | iPhone/iPod Select/Enter |
Additional Features:
1.In the battery-only mode, the JBL On Stage Micro II loudspeaker dock will turn off to save battery power when muted or paused for longer than 10 minutes.
2.In the wall adapter power supply mode JBL On Stage Micro II will go into standby mode if no audio signal is detected for 10 minutes. The green LED will turn off. Once an audio signal is detected the speaker will return to normal playing mode and the green LED will light up.
3.iPod touch and iPhone menu navigation may require the user to manually put the iPhone/iPod in music mode.
4.When the batteries are low the “low battery LED” will turn on. Change batteries immediately or switch to the power adapter.
JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. *The trademark On Stage is used with permission of OSA International, Inc.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone/iPod not included. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. “Works with iPhone” means than an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Features, specifications and appearance are subject to change without notice.
JBL et Odyssey sont des marques commerciales de Harman International Industries, Incorporated, déposées aux États-Unis et/ou dans d’autres pays. *Le marque “On Stage” est utilisée avec la permission de OSA International, Inc.
iPhone est une marque commerciale d’Apple Inc., deposée aux États-Unis et dans d’autres pays. iPod est une marque commerciale d’Apple Inc., deposée aux États-Unis et dans d’autres pays. iPhone/iPod non inclus. « Made for iPod » signifie qu’un accessoire électronique a été conçu pour assurer la connexion spécifiquement à iPod et a été homologué par le développeur pour répondre aux normes de performance d’Apple. « Works with iPhone » signifie qu’un accessoire électronique a été conçu pour assurer la connexion spécifiquement à iPhone et a été homologué par le développeur pour répondre aux normes de performance d’Apple. Apple n’assume aucune responsabilité pour le fonctionnement de cet appareil, ni pour sa conformité aux normes de sécurité et réglementaires.
Sous réserve de modification.
Harman Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA 1.516.255.4525 (USA only)
www.jbl.com
© 2010 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés.
Part Number: 950-0282-001